CalAmp 24 Pin Harness Converter for ATrack AK11

  • Posted on: 27 December 2019
  • By: chris_admin

UniteGPS developed a power converter that allows you to install ATrack AK11 devices using existing CalAmp 24 pin (5C348 or 5C360) wiring harnesses. This harness only covers power, ground and ignition. CalAmp wiring uses black for ground, white for ignition and red for power. This harness connects the black and red wires to the corresponding red and black of the ATrack devices. The ignition wire on the ATrack is yellow and this harness connects the white on the CalAmp side to the yellow ATrack.

 

 

 

 

 

 

 

<div style="text-align:center"><img alt="" src="/sites/default/files/ATrack-CalAmp-Harness-Front-View.png" style="height:320px; width:480px" />
<p>CalAmp2600 with Internal Antenna (Top) vs. CalAmp2600 with External Antenna (Bottom)</p>
<div style="text-align:justify">

<div style="text-align:center"><img alt="" src="/sites/default/files/ATrack-Power-Harness-Connected.png" style="height:320px; width:480px" />
<p>CalAmp2600 with Internal Antenna (Top) vs. CalAmp2600 with External Antenna (Bottom)</p>
<div style="text-align:justify">

<div style="text-align:center"><img alt="" src="/sites/default/files/ATrack-CalAmp-Power-Harness.png" style="height:320px; width:480px" />
<p>CalAmp2600 with Internal Antenna (Top) vs. CalAmp2600 with External Antenna (Bottom)</p>
<div style="text-align:justify">

<div style="text-align:center"><img alt="" src="/sites/default/files/ATrack-CalAmp-Harness-24 PIN.png" style="height:320px; width:480px" />
<p>CalAmp2600 with Internal Antenna (Top) vs. CalAmp2600 with External Antenna (Bottom)</p>
<div style="text-align:justify">